[启动问题]卡在获取基准机设定获取

abcdcba

--- Begin mu3_pre_startup ---

DVD: hook enabled.

Reg hook init

System: DipSw1=1 set

System: Freeplay enabled

Epay: Init

LED 15093: hook enabled.

VFD: enabling (port=2)

XInput: --- Begin configuration ---

XInput: Mouse lever emulation : 1

XInput: --- End configuration ---

Unity: Hook enabled.

--- End mu3_pre_startup ---

Unity: Loaded mono.dll

Clock: Returning JST timezone

Unity: Starting Mono domain "Unity Root Domain"

Unity: Assembly directory: D:\SDDT_1.45\package\mu3_Data\Managed

Unity: Loading assembly: BepInEx\core\BepInEx.Preloader.dll

Unity: Invoking method 0000000005322DB0

Clock: Returning JST timezone

DXGI: CreateDXGIFactory1 hook hit

D3D11: D3D11CreateDevice hook hit

DXGI: CreateDXGIFactory hook hit

Gfx: ShowWindow hook hit

Unity: Loaded amdaemon_api.dll

LED 15093: Starting backend DLL

Unity: Loaded cri_ware_unity.dll

Clock: Returning JST timezone

LED 15093: Get board info (board 0, node 1)

LED 15093: Get protocol version (board 0, node 1)

LED 15093: Get firmware checksum (board 0, node 1)

LED 15093: Set timeout (board 0, count 0)

LED 15093: Reset (board 0, node 1, type d9)

LED 15093: Get board status (board 0, node 1, clear 1)

LED 15093: Set timeout (board 0, count 0)

LED 15093: Set LED response setting (board 0, node 1, SW 1)

Clock: Returning JST timezone*N 之后除了这个就没了

abcdcba

AMdaemon:

--- Begin mu3_pre_startup ---

DVD: hook enabled.

Reg hook init

System: DipSw1=1 set

System: Freeplay enabled

Epay: Init

LED 15093: hook enabled.

VFD: enabling (port=2)

XInput: --- Begin configuration ---

XInput: Mouse lever emulation : 1

XInput: --- End configuration ---

Unity: Hook enabled.

--- End mu3_pre_startup ---

Security: Opened handle

Pcbid: Get PCB serial

Security: nusec_ioctl_get_nvram_geometry

Security: nusec_ioctl_get_nearfull

Hwmon: Opened device

AmVideo: amDllVideoOpen

AmVideo: amDllVideoSetResolution

AmVideo: amDllVideoClose

Netenv: GetAdaptersInfo: Virtualized LAN configuration:

Netenv: Interface IP : 192.168.162. 11

Netenv: Router IP : 192.168.162.254

Netenv: MAC Address : 01:02:03:04:05:06

Netenv: GetAdaptersInfo: Virtualized LAN configuration:

Netenv: Interface IP : 192.168.162. 11

Netenv: Router IP : 192.168.162.254

Netenv: MAC Address : 01:02:03:04:05:06

Netenv: GetAdaptersInfo: Virtualized LAN configuration:

Netenv: Interface IP : 192.168.162. 11

Netenv: Router IP : 192.168.162.254

Netenv: MAC Address : 01:02:03:04:05:06

SetupAPI: Interface {4d1e55b2-...} -> Device node $io4\vid_0ca3

VFD: Open

VFD: Reset

VFD: Screen Power, 1

VFD: Set Encoding, 2 (shift-jis)

USB I/O: Device opened

USB I/O: Get manufacturer string

USB I/O: Get product string

USB I/O: Clear board status

USB I/O: Set comm timeout

USB I/O: Set sampling count

NFC Assembly: Starting backend DLL

NFC 00: Reset

Netenv: GetBestRoute ip4 0.0.0.0 -> ip4 0.0.0.0

Clock: Returning JST timezone

Epay: my_ThincaPaymentGetInstance hit!

Epay: Thinca Initialize 0

Epay: Thinca Set Event Handler 00007FF700902178

Epay: Thinca Set Resource D:\SDDT_1.45\package\tfps-res-pro\

Epay: Thinca Set ICAS Client log 2 | y:\SDDT\log\emoney_log\icasclient.log

Epay: Thinca Set Paylog 2 | y:\SDDT\log\emoney_log\thincapayment.log | 10 | 20M

Epay: Thinca Set ICAS Client Config TfpsAimeRwAdapter,\\.\COM1:115200:00 | 60000

Epay: Thinca Set Goods Code 0990

Epay: my_ThincaPaymentGetInstance hit!

Epay: Thinca Unknown 220/228 1

Epay: Thinca Unknown 220/228 2

Epay: Thinca Unknown 220/228 3

Epay: Thinca Unknown 220/228 5

Epay: Thinca Unknown 220/228 6

Epay: Thinca Unknown 220/228 8

Epay: Thinca Unknown 220/228 7

Epay: Thinca Unknown 220/228 9

Epay: my_ThincaPaymentGetInstance hit!

Epay: Thinca Set Terminal Serial ACAE01A9999

Security: nusec_ioctl_get_billing_pubkey

00007FF700A001E1:0/1024

<<< 00007FF700A001E1:162/1024

Security: nusec_ioctl_get_play_limit

Security: nusec_ioctl_get_nearfull

NFC 00: Reset

Security: nusec_ioctl_get_play_count

Security: nusec_ioctl_put_trace_log_data

00000000: 01 18 0c 0a 01 2b 24 50 6f 77 65 72 20 6f 6e 20 .....+$Power on

00000010: 41 36 39 45 30 31 41 38 38 38 38 20 53 44 44 54 A69E01A8888 SDDT

00000020: 20 31 2e 34 35 20 20 20 41 36 39 45 01 41 88 88  1.45   A69E.A..

00000030: 21 05 00 00 00 00 00 00 00 00 00 00             !...........

H: 1 T: 0

Netenv: GetBestRoute ip4 0.0.0.0 -> ip4 192.168.162.11

Security: nusec_ioctl_put_trace_log_data

00000000: 02 18 0c 0a 01 2b 24 00 00 00 01 01 00 01 01 01 .....+$.........

00000010: 01 01 01 01 01 01 21 05 41 36 39 45 01 41 88 88 ......!.A69E.A..

00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00000030: 00 00 00 00 00 00 00 00 00 00 00 00             ............

H: 2 T: 0

Netenv: Virtualized ICMP Ping to ip4 192.168.162.254

RGB LED 08: Reset

Netenv: Virtualized ICMP Ping to ip4 192.168.162.254

RGB LED 08: Get info

Security: nusec_ioctl_get_nvram_available: used=2 avail=7152

abcdcba

Bepinex:

[Message: BepInEx] BepInEx 5.4.17.0 - mu3 (4/6/2023 1:09:14 AM)

[Info : BepInEx] Running under Unity v5.6.4.11300998

[Info : BepInEx] CLR runtime version: 2.0.50727.1433

[Info : BepInEx] Supports SRE: True

[Info : BepInEx] System platform: Bits64, Windows

[Message: BepInEx] Preloader started

[Info : BepInEx] Loaded 1 patcher method from [BepInEx.Preloader 5.4.17.0]

[Info : BepInEx] Loaded 1 patcher method from [BepInEx.MonoMod.Loader 1.0.0.0]

[Info : BepInEx] 2 patcher plugins loaded

[Info : BepInEx] Patching [UnityEngine] with [BepInEx.Chainloader]

[Info : MonoMod] Collecting target assemblies from mods

[Info : BepInEx] Patching [Assembly-CSharp] with [BepInEx.MonoMod.Loader.Patcher]

[Message: MonoMod] [Main] Scanning for mods in directory.

[Message: MonoMod] [ReadMod] Loading mod dir: D:\SDDT_1.45\package\BepInEx\monomod

[Message: MonoMod] [ReadMod] Loading mod: D:\SDDT_1.45\package\BepInEx\monomod\Assembly-CSharp.BetterGiveUp.mm.dll

[Message: MonoMod] [ReadMod] Loading mod: D:\SDDT_1.45\package\BepInEx\monomod\Assembly-CSharp.InfiniteGP.mm.dll

[Message: MonoMod] [ReadMod] Loading mod: D:\SDDT_1.45\package\BepInEx\monomod\Assembly-CSharp.InfiniteStory.mm.dll

[Message: MonoMod] [ReadMod] Loading mod: D:\SDDT_1.45\package\BepInEx\monomod\Assembly-CSharp.LoadBoost.mm.dll

[Message: MonoMod] [ReadMod] Loading mod: D:\SDDT_1.45\package\BepInEx\monomod\Assembly-CSharp.LockSelectionTime.mm.dll

[Message: MonoMod] [ReadMod] Loading mod: D:\SDDT_1.45\package\BepInEx\monomod\Assembly-CSharp.Pause.mm.dll

[Message: MonoMod] [ReadMod] Loading mod: D:\SDDT_1.45\package\BepInEx\monomod\Assembly-CSharp.PlatinumTiming.mm.dll

[Message: MonoMod] [ReadMod] Loading mod: D:\SDDT_1.45\package\BepInEx\monomod\Assembly-CSharp.SkipNotice.mm.dll

[Message: MonoMod] [ReadMod] Loading mod: D:\SDDT_1.45\package\BepInEx\monomod\Assembly-CSharp.SkipPreMusicRitual.mm.dll

[Message: MonoMod] [ReadMod] Loading mod: D:\SDDT_1.45\package\BepInEx\monomod\Assembly-CSharp.SortByInternalDifficulty.mm.dll

[Message: MonoMod] [ReadMod] Loading mod: D:\SDDT_1.45\package\BepInEx\monomod\Assembly-CSharp.UnlockAllMusic.mm.dll

[Message: MonoMod] [ReadMod] Loading mod: D:\SDDT_1.45\package\BepInEx\monomod\Assembly-CSharp.UnlockAndSetJewelBoostNine.mm.dll

[Message: MonoMod] [ReadMod] Loading mod: D:\SDDT_1.45\package\BepInEx\monomod\Assembly-CSharp.UnlockFramerate.mm.dll

[Message: MonoMod] [ReadMod] Loading mod: D:\SDDT_1.45\package\BepInEx\monomod\Assembly-CSharp.UnlockGameEvents.mm.dll

[Message: MonoMod] [ReadMod] Loading mod: D:\SDDT_1.45\package\BepInEx\monomod\Assembly-CSharp.UnlockMasterDifficulty.mm.dll

[Message: MonoMod] [ReadMod] Loading mod: D:\SDDT_1.45\package\BepInEx\monomod\Assembly-CSharp.UnlockMemoryChapters.mm.dll

[Message: MonoMod] [Main] Found 16 mods

[Message: MonoMod] [Main] mm.PatchRefs(); fixup pre-pass

[Message: MonoMod] [Main] mm.AutoPatch();

[Message: MonoMod] [AutoPatch] Parsing rules in loaded mods

[Message: MonoMod] [AutoPatch] PrePatch pass

[Message: MonoMod] [AutoPatch] Patch pass

[Message: MonoMod] [AutoPatch] PatchRefs pass

[Message: MonoMod] [PostProcessor] PostProcessor pass #1

[Message: MonoMod] [Main] Done.

[Message: BepInEx] Preloader finished

[Warning: HarmonyX] AccessTools.Property: Could not find property for type UnityEngine.Application and name isBatchMode

[Message: BepInEx] Chainloader ready

[Message: BepInEx] Chainloader started

[Info : BepInEx] 0 plugins to load

[Message: BepInEx] Chainloader startup complete

[Info : Unity Log] [UnlockFrameRate] Framerate locked to 60 (vanilla)

[Info : Console] Loading data cache...

[Info : Unity Log] AMManager : Initialize start

[Info : Unity Log] AMManager : AMDaemon.Core.IsReady

[Info : Unity Log] AMManager : Initialize finished

[Info : Unity Log] Backup : SetupRecords

[Info : Unity Log] Backup : SetupRecords done

[Info : Unity Log] Backup : status[0] = Valid

[Info : Unity Log] Backup : status[1] = Valid

[Info : Unity Log] Backup : status[2] = Valid

[Info : Unity Log] Backup : status[3] = Valid

[Warning: Unity Log] DataStudio: データ missionevent05020 で MU3.Data.RewardData_DS 型を参照する StringIDに無効な値が設定されています。

[Info : Console] Saving chart analysis cache...100,

[Info : Unity Log] Scenes/10_Root をロードします

abcdcba

感觉主要问题集中在Clock: Returning JST timezone, 但是我并不知道是什么造成了这个问题。

abcdcba

更新: 之前的问题修复了，但是又出现新的问题了

--- Begin mu3_pre_startup ---

DVD: hook enabled.

Reg hook init

Epay: Init

LED 15093: hook enabled.

VFD: enabling (port=2)

XInput: --- Begin configuration ---

XInput: Mouse lever emulation : 1

XInput: --- End configuration ---

Unity: Hook enabled.

--- End mu3_pre_startup ---

Unity: Loaded mono.dll

Clock: Returning JST timezone

Unity: Starting Mono domain "Unity Root Domain"

Unity: Assembly directory: D:\SDDT_1.45\package\mu3_Data\Managed

Unity: Loading assembly: BepInEx\core\BepInEx.Preloader.dll

Unity: Invoking method 0000000004E43400

Clock: Returning JST timezone

DXGI: CreateDXGIFactory1 hook hit

D3D11: D3D11CreateDevice hook hit

DXGI: CreateDXGIFactory hook hit

Gfx: ShowWindow hook hit

Unity: Loaded amdaemon_api.dll

LED 15093: Starting backend DLL

Unity: Loaded cri_ware_unity.dll

LED 15093: Get board info (board 0, node 1)

LED 15093: Get protocol version (board 0, node 1)

LED 15093: Get firmware checksum (board 0, node 1)

LED 15093: Set timeout (board 0, count 0)

LED 15093: Reset (board 0, node 1, type d9)

LED 15093: Get board status (board 0, node 1, clear 1)

LED 15093: Set timeout (board 0, count 0)

LED 15093: Set LED response setting (board 0, node 1, SW 1)

Clock: Returning JST timezone*N

abcdcba

AMdaemon

--- Begin mu3_pre_startup ---

DVD: hook enabled.

Reg hook init

Epay: Init

LED 15093: hook enabled.

VFD: enabling (port=2)

XInput: --- Begin configuration ---

XInput: Mouse lever emulation : 1

XInput: --- End configuration ---

Unity: Hook enabled.

--- End mu3_pre_startup ---

Security: Opened handle

Pcbid: Get PCB serial

Security: nusec_ioctl_get_nvram_geometry

Security: nusec_ioctl_get_nearfull

Hwmon: Opened device

AmVideo: amDllVideoOpen

AmVideo: amDllVideoSetResolution

AmVideo: amDllVideoClose

Netenv: GetAdaptersInfo: Virtualized LAN configuration:

Netenv: Interface IP : 192.168.162. 11

Netenv: Router IP : 192.168.162.254

Netenv: MAC Address : 01:02:03:04:05:06

Netenv: GetAdaptersInfo: Virtualized LAN configuration:

Netenv: Interface IP : 192.168.162. 11

Netenv: Router IP : 192.168.162.254

Netenv: MAC Address : 01:02:03:04:05:06

SetupAPI: Interface {4d1e55b2-...} -> Device node $io4\vid_0ca3

USB I/O: Device opened

USB I/O: Get manufacturer string

USB I/O: Get product string

USB I/O: Clear board status

USB I/O: Set comm timeout

USB I/O: Set sampling count

NFC Assembly: Starting backend DLL

NFC 00: Reset

Netenv: GetBestRoute ip4 0.0.0.0 -> ip4 0.0.0.0

Clock: Returning JST timezone

Security: nusec_ioctl_get_billing_pubkey

00007FF7B31B01E1:0/1024

<<< 00007FF7B31B01E1:162/1024

Security: nusec_ioctl_get_play_limit

NFC 00: Reset

Security: nusec_ioctl_get_nearfull

Security: nusec_ioctl_get_play_count

Security: nusec_ioctl_put_trace_log_data

00000000: 01 18 0c 0b 02 3b 33 50 6f 77 65 72 20 6f 6e 20 .....;3Power on

00000010: 41 36 39 45 30 31 41 38 38 38 38 20 53 44 44 54 A69E01A8888 SDDT

00000020: 20 31 2e 34 35 20 20 20 41 36 39 45 01 41 88 88  1.45   A69E.A..

00000030: 21 05 00 00 00 00 00 00 00 00 00 00             !...........

H: 1 T: 0

RGB LED 08: Reset

Netenv: GetBestRoute ip4 0.0.0.0 -> ip4 192.168.162.11

Security: nusec_ioctl_put_trace_log_data

00000000: 02 18 0c 0b 02 3b 34 00 00 00 01 01 00 01 01 01 .....;4.........

00000010: 01 01 01 01 01 01 21 05 41 36 39 45 01 41 88 88 ......!.A69E.A..

00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00000030: 00 00 00 00 00 00 00 00 00 00 00 00             ............

H: 2 T: 0

Netenv: Virtualized ICMP Ping to ip4 192.168.162.254

RGB LED 08: Get info

Netenv: Virtualized ICMP Ping to ip4 192.168.162.254

Netenv: Virtualized ICMP Ping to ip4 10.0.0.120

Security: nusec_ioctl_get_nvram_available: used=2 avail=7152

abcdcba

bepinex